Intelligent Surface Renewal Technology for consistent fouling control performance
Micron® ReGen brings a breakthrough approach to fouling control. Inspired by nature, its intelligent Surface Renewal Technology continually renews the coating surface, helping prevent fouling from getting a grip and keeping your hull smoother throughout the season.
Meet Micron ReGen
How Surface Renewal Technology works
In nature, many marine organisms prevent attachment not through smoothness or toxicity, but through continuously regulated surface chemistry. Inspired by this principle, Micron ReGen uses intelligent Surface Renewal Technology to continually refresh its surface, helping prevent fouling from gaining a foothold.
At the heart of this technology is a micro-porous, low surface energy layer with both hydrophobic and hydrophilic properties. Together, these create a surface that helps deter fouling settlement and makes it more difficult for organisms to take hold.
When immersed, the micro-porous surface interacts with ions in the water, activating self-polishing action of Micron ReGen. The surface gradually becomes soluble, slowly polishing away and replenishing itself to expose a renewed surface and help deliver consistent performance throughout the season.
This continual renewal also helps reduce coating thickness over time, preventing unwanted paint build-up and maintaining a smoother hull for improved boating performance.
Benefits of Micron ReGen
Less maintenance
A smoother, more efficient hull
Less preparation
Faster turnaround
True color that lasts
Performance proven on the water
A smoother hull means more efficient movement through the water. Through Surface Renewal Technology, Micron ReGen continually renews its surface, helping control fouling while maintaining a smooth finish for reduced drag and improved boating performance.
Real-world, on-water testing against conventional biocidal fouling control showed:
- Up to 4.7% reduction in vessel drag
- Up to 4.7% reduction in fuel consumption and CO₂ emissions
- Up to 1.7% increase in vessel speed*
*For equivalent engine power. Results based on real-world, on-water testing of an in-service vessel, with data collected across three seasons. Exact performance will vary depending on vessel type, size and use.
Simple to make the switch
Less preparation. More time on the water.
Already using a traditional biocidal antifouling in good condition? Switching to Micron ReGen is simple.
Previously coated surfaces in good condition
- Prepare: High-pressure wash and rub down with a scouring pad to remove loose paint.
- Apply: Apply 2 coats of Micron ReGen.
- Get back on the water: No tie-coat or primer is required over compatible existing biocidal antifouling coatings in good condition.
Starting with an unpainted surface?
Application schemes vary according to substrate, including GRP, aluminium, lead, iron/steel and wood, so please download the technical datasheet before application.
Questions about Micron ReGen?
Everything you need to know about Surface Renewal Technology, switching from your current antifouling, application and getting the best from Micron ReGen.
Questions about your project?
Get expert guidance on the right International® coatings and application support for your boat.